Construction Certificates

Construction Certificate

Home / Services / Construction Certificate
🔨

Approval to begin construction with confidence - confirming your plans comply with the BCA.

Construction Certificate Sydney & NSW — Expert Private Certifier Services

In New South Wales, a Construction Certificate (CC) must be obtained before any building or construction work can commence. This certificate will ensure that your detailed building plans are in accordance with the conditions of your Development Consent (DA) and the Building Code of Australia (BCA)—the green light is given to your builder to commence the work on site.

At AllCert Group, the accredited private certifiers simplify and streamline the process of applying to obtain a construction certificate in NSW. We handle the whole CC process, keeping your project on track and in compliance with the council, by looking at your architectural drawings and structural reports as well as liaising with your design team and coordinating with the council.

Whether it is a construction certificate in the inner suburbs of Sydney, Greater Western Sydney or any other part of NSW, AllCert Group will provide a quick turnaround, excellent communication and professional advice at all levels. Request a free CC quote or call 02 9145 3959.

What Is a Construction Certificate (CC) in NSW?

A construction certificate is a formal approval, issued by a council or a registered private certifier, confirming that your detailed building plans and specifications comply with your development consent and the Building Code of Australia. In NSW you need one before any building work can start.

A Construction Certificate NSW is a formal building approval that is granted after your Development Application (DA) being approved by your local council. Where a DA provides answers to the question “What can be built?” the CC provides answers to the question “How will it be built?” The certifier checks that your detailed construction plans and engineering requirements conform to all standards and consent conditions. The Environmental Planning and Assessment Act 1979 (EP&A Act) under section 6.7 states that no building work may commence in NSW without a valid construction certificate. Trying to construct without one puts your project at risk of stop-work orders, huge fines, and even demolition orders.

Some of the most important things a CC verifies: 

  • Your construction plans are detailed and in line with your approved DA. 
  • All the design is in accordance with the Building Code of Australia (BCA) and other relevant Australian standards.
  • Structural engineering, fire safety, energy efficiency (BASIX) and accessibility requirements are met.
  • Any pre-construction requirements of your DA have been fulfilled.
  • The long service levy and other statutory fees have been paid (where applicable).

Construction Certificate (CC) vs Development Approval (DA): A DA says what you may build, a CC says how it will be built. You need both, in that order, before work starts. Once building is finished, an Occupation Certificate is needed before the building can be used.

Update: NSW is renaming construction certificates NSW 

NSW passed new building approvals legislation in 2026 that will replace the term “construction certificate” with “building approval”. At the time of writing, the start date has not been announced and the transitional rules are yet to be published, so the construction certificate process on this page still applies. If your project is in the approvals pipeline, talk to us about timing.

Construction Certificate Sydney

Construction Certificate Services Across Sydney and NSW

AllCert Group is a professional construction certificate Sydney company that offers its services in all metropolitan and regional regions in NSW. Our certifiers, aligned with Our certifiers, aligned with industry standards set by AIBS (Australian Institute of Building Surveyors), are familiar with the local planning controls, council conditions and site-specific  challenges across all 33 councils in Greater Sydney and beyond.

Areas we regularly service include:

•       Inner West & City of Sydney

•       Camden & Campbelltown

•       Eastern Suburbs

•       Ryde & Macquarie Park

•       North Shore & Northern Beaches

•       Lane Cove & Ku-ring-gai

•       Parramatta & Western Sydney

•       Willoughby & Mosman

•       Blacktown & Hills District

•       Canterbury-Bankstown

•       Sutherland Shire & St George

•       Northern NSW & Central Coast

•       Liverpool & South-West Sydney

•       Newcastle & Hunter Region

•       Penrith & Blue Mountains

•       Regional NSW (on request)

When you require a construction certificate in Sydney, be it a residential renovation in Sutherland Shire, a townhouse development in Parramatta, or a commercial fit-out in the CBD, the team at AllCert is prepared to work quickly and ensure that your approvals are on schedule.

How to Get a Construction Certificate in NSW — Step by Step

Knowing how to get a construction certificate in NSW can save you weeks of delays. In short: get development consent, appoint a registered certifier, prepare your documents, lodge on the NSW Planning Portal, pass the compliance assessment, and receive your CC. The entire procedure between DA approval and issuing of CC is as follows:

Step 1 — Obtain Development Consent (DA Approval)

Your local council must approve your development application before you can apply to a CC. The terms of consent will be contained in your DA approval, which will require your CC plans to meet.

Step 2 — Appoint a Registered Certifier

By the laws of NSW, your certifier should be independent—your builder should not appoint or influence the selection of the certifier. AllCert Group is a registered certifier [CONFIRM exact registration wording] able to issue a construction certificate and perform the role of Principal Certifier (PC) in all classes of buildings. A CC can be issued by your council or by a registered private certifier, so you can choose who manages it.

Step 3 — Prepare Your Construction Documentation

The following are documents that you will be required to collect and prepare before submitting your CC application:

  • Stamped DA consent and all conditions of consent.
  • Detailed architectural drawings (floor plans, elevations, sections).
  • Structural engineering plans, specifications and calculations.
  • BASIX certificate (most residential projects in NSW require this certificate)
  • Fire safety schedule (where necessary).
  • Geotechnical or soil investigation reports (where necessary by the DA conditions)
  • Stormwater management plan accessibility (DDA/BCA) compliance documentation.
  •  Receipt of long service levy payment (where the value of the works is over 250,000)
  •  Home building compensation fund certificate (when a licensed builder is employed to do residential work exceeding 20,000)

Step 4 — Lodge Application via the NSW Planning Portal

All the CC applications in NSW should be submitted via the NSW Planning Portal. AllCert handles the entire lodgement procedure on your behalf, filling in all the necessary fields, attaching documentation, and real-time monitoring of the status of your application.

Step 5 — Compliance Assessment

All plans and documentation submitted to us are thoroughly checked by our certifiers against the following:

  • The terms of your Development Consent.
  • The Building Code of Australia (BCA) / National Construction Code (NCC).
  • Relevant Australian Standards and State Environmental Planning Policies (SEPPs).

In the event that any nonconformances are found, we give straightforward, realistic recommendations as to what should be revised—and collaborate with your design and engineering team to fix problems within a short time.

Step 6 — Construction Certificate Issued

After all plans and documents are found to be in compliance, AllCert then issues your construction certificate, stamps your plans and gives you the approved documents your builder needs. Work can start once a Principal Certifier is appointed and the required notice of commencement is given.

Construction Certificate Checklist — Documents Required

Document

Required for

Mandatory?

DA Consent + conditions

All projects

Yes

Architectural drawings (plans, elevations, sections)

All projects

Yes

Structural engineering plans & specifications

Most projects

Yes

BASIX certificate

Residential projects (new dwellings, renovations $50k+)

Yes

Fire safety schedule

Class 2–9 buildings, some Class 1

Conditional

Geotechnical / soil report

Where required by DA conditions

Conditional

Stormwater & drainage plans

Most projects

Yes

Accessibility (DDA) compliance report

Class 2–9 buildings

Conditional

Long service levy receipt

Projects valued $250,000+

Yes

Home Building Compensation Fund cert.

Licensed residential builder, works $20k+

Yes

Energy efficiency report (NCC Section J)

Commercial buildings

Conditional

How Much Does a Construction Certificate Cost in NSW?

Construction certificate fees in NSW are not fixed. They depend on the project, and government
charges such as the long service levy are separate from certifier fees. The main factors are:

  • The value and size of the building work
  • Building class and complexity (a single dwelling is very different from a multi-unit or
    mixed-use building)
  • Fire safety, accessibility and BASIX requirements, and any performance solutions
  • The quality of the documents supplied and the number of revisions needed
  • Whether Principal Certifier services are bundled with the CC.

AllCert Group gives you a clear written quote once we have reviewed your DA consent and plans.

Related Building Certification and Fire Safety Services

A Construction Certificate is only a part of the entire building approval process. AllCert Group offers an end-to-end package of building certification services to assist your project, including pre-DA up to Occupation Certificate – to achieve a smooth transition in compliance at each stage.

Building Certification

Our accredited building certification consultants manage the entire certification cycle of residential, commercial and mixed use developments in NSW. Services are related to Complying Development Certificates (CDC), Construction Certificates, critical stage inspections, and Occupation Certificates. AllCert does all the certification management end to end to ensure that nothing is left out whether you are a first time homeowner or a large scale developer.

Fire Safety Certification

To secure a Construction Certificate of Class 2-9 buildings, one of the most important aspects of the process is ensuring that your project will comply with all of the fire safety regulations as outlined in the BCA. AllCert fire safety certification division makes and evaluates fire safety plans, liaises with fire engineers and makes sure that your building has both passive and active fire systems that comply with the regulations, both at the time of the first CC submission and Annual Fire Safety Statement.

Occupation Certificate

An Occupation Certificate is issued at the end of construction, confirming the completed building is safe and authorised for occupation. AllCert coordinates OC issuance seamlessly with our CC and PC services — minimising handover delays and giving you certainty from slab to settlement.

Why Choose AllCert Group for Your Construction Certificate in Sydney?

When searching for how to get a construction certificate in Sydney or across NSW, it pays to work with a team that combines deep technical knowledge with genuine responsiveness. Here is what sets AllCert apart:

  • Registered private certifiers under the Building and Development Certifiers Act 2018.
  • AIBS Member — adhering to the highest industry professional standards.
  • DDA Access Accredited — expertise in accessibility compliance integrated into every CC assessment.
  • Professional indemnity insured for complete peace of mind.
  • Fast turnarounds — most CCs issued within 2–4 weeks of complete documentation.
  • Respond to all enquiries within 24 business hours — guaranteed.
  • Direct, experienced certifiers — not junior staff or subcontractors.
  • Practical, plain-English guidance throughout — no jargon, no unnecessary delays.
  • Full coordination with your architects, engineers, and council on your behalf.
  • Extensive experience across residential, commercial, mixed-use, and multi-unit developments across Sydney and NSW.

Types of Projects Requiring a Construction Certificate NSW

AllCert Group issues Construction Certificates in NSW for a wide range of project types, including:

Residential Projects

  • New houses, dual occupancies and duplexes
  • Townhouse and terrace developments
  • Secondary dwellings and granny flats (where DA required)
  • Major renovations and additions requiring council DA approval
  • Swimming pools and outbuildings (where DA required)

Multi-Unit Residential

  • Low-rise apartment buildings (Class 2)
  • Medium and high-density residential developments
  • Mixed-use developments with ground-floor retail
  • Boarding houses and co-living developments

Commercial and Industrial

  • Office fit-outs and commercial tenancy works
  • Retail premises and shopfront alterations
  • Warehouses, industrial sheds, and storage facilities
  • Childcare centres, medical centres, and places of public entertainment
  • Hotels, motels, and serviced apartments 
What We Offer
Comprehensive plan and documentation assessments
Advice on meeting BCA and DA requirements
Coordination with design and engineering teams
Issuing of Construction Certificates
Ongoing support to ensure a compliant build
Principal Certifier services for inspection oversight

Frequently Asked Questions

First get development consent from your council. Then appoint a registered certifier, prepare your plans and documents, lodge through the NSW Planning Portal and pass the compliance assessment. AllCert Group can manage the whole process for you.

Get Expert Advice

Ready to discuss your project?

Our team responds within 24 business hours with tailored guidance for your project.

Request a Free Quote →
🕐 Mon–Fri, 9am–5pm
Get Started Today

Ready to discuss your project?

Contact AllCert today. We respond within 24 business hours with clear, practical advice.